Télécharger Imprimer la page

Samsung HW-D7000 Guide D'utilisation page 42

Publicité

Les langues disponibles

Les langues disponibles

Setup
Musical Room Calibration
By setting the Musical Room Calibration (MRC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 7.1-channel sound fi eld optimized for
your environment.
ASC MIC
VIDEO
AUDIO
PHONES
AUX 1 IN
Musical Room Calibration Mode
You will hear either the Musical Room Calibration
mode or the User Speaker Settings.
Off: You will hear sound in the Speaker Setting
value.
On: You will hear sound in the Musical Room
Calibration mode.
Measurement
1.
Plug the ASC microphone into the ASC IN jack.
2.
Place the ASC microphone at the listening position.
Musical Room Calibration will be automatically
set up in the following sequence:
Front L
Center
R
Surround Back R
L
Surround L
Press the RETURN button to cancel the
Musical Room Calibration Setting.
42
English
HW-D7000_XAC_0516.indd 42
HW-D7000_XAC_0516.indd 42
All manuals and user guides at all-guides.com
ASC
AUDIO
PHONES
MIC
VIDEO
3D
SOUND
ASC
AUX
1 IN
AUDIO
ASSIGN
EFFECT
AUDIO
RETURN
MEMORY
MENU
SELECT
AV
SYNC
TUNING
MODE
microphone
Smart
HUB
vTuner
CONTROL
TONE
Front R
Surround
Surround Back
Subwoofer
NOTE
Running the Musical Room Calibration
function takes about 3 minutes.
Make sure there is no disc in the product when
you run the Musical Room Calibration function.
If the ASC microphone is disconnected during the
Musical Room Calibration setup, the setup will be
canceled.
If the product is connected to external devices or
other components (such as an iPod, AUX, D.IN),
the Musical Room Calibration Setup may not work
properly.
Noise may result in incorrect measurements.
Ensure the room is quiet when you run the
Musical Room Calibration.
Place the microphone in the main listening
position.
Make sure there are no objects between the
speakers and microphone.
Note that the test tones of the speakers may be
loud.
Do not place the microphone behind furniture or
too close to the wall. Otherwise, it can produce an
incorrect test result.
2011-05-16
2011-05-16
3:46:25
3:46:25

Publicité

loading