Sauber VCE-129394.2 Mode D'emploi page 15

CLEAN THE HEPA AIR OUTLET FILTER
1. Press the top of the air outlet cover to unclip the cover.
2. Press and unclip the HEPA air outlet filter from the side.
3. Rinse the HEPA air outlet filter with clean water. Dry it thoroughly before placing it back.
4. Put back the air outlet cover after the filter is placed back.
Please note:

The filters in the cleaner will became dusty over time. This is normal and will not affect the performance of
the filter. If the filters are so dusty that suction does not return to 100%, we suggest that the filters be
removed then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or some
high temperature objects before refitting into the vacuum. This should be done once six months or when
suction appears to be reduced obviously.

The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat
and could become damaged.

All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters
must be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical
outlet when checking the filters.

Do not wash the filters in a washing machine or a dishwasher.
Parking:
This vacuum cleaner can be parked as below style to save your room space.
- 14 -
HEPA air outlet filter