Clean Air Optima CA-702 Smart Manuel page 8

Operation with Clean Air Optima® App
Connectivity
Compatibility with smartphone and tablet:
iPhone, iPad and Android devices
Device connets via WiFi with App:
CleanAirOptima
Attention: The router must be set to the 2.4 GHz broad-
band. If the router is set to the 5.0 GHz, it is impossible to
establish a connection.
Set up WiFi connection
1. Download and install the "CleanAirOptima" App in the
App Store or Google Play Store.
2. Make an account and log in.
3. The router must be set to the 2.4 GHz broadband. If the router is set to the 5.0 GHz, no
connection can be established.
4. Make sure Bluetooth is enabled on your smartphone.
5. Make sure that your smartphone or tablet is successfully connected to your WiFi network.
6. Plug the device into the power socket and switch it on. Press the mode button for 3-5
seconds, the WIFI light will start flashing.
7. Open the 'CleanAirOptima' App and click on 'Add device'
select it. If not choose 'Auto Scan'. Follow the on-screen instructions to connect the device
to your network.
8. Choose to add the Clean Air Optima® device on the App, follow the instructions in the App.
9. When the device is paired, the WiFi indicator
10. After the configuration is successful, you can use the Clean Air Optima® App to operate the
device.
Note:
• If your default network has changed, reset the WiFi connection, follow step 1 to 9 in the
'Set up WiFi connection' section.
• If you want to pair multiple devices to your smartphone or tablet, you have to do this one
after the other.
• Make sure that the distance between your smartphone or tablet and the device is less than
5 meters and there are no obstacles. Also make sure you are in the same room as the
device.
Reset the WiFi function:
- The device must be switched on.
- Reset the WiFi by pressing the 'Mode' button for 3-5 seconds, the indicator light of the WiFi
will blink rapidly.
8
. Your device is listed and you can
light stays on constantly.