Clean Air Optima CA-702 Smart Manuel page 5

27. If you switch off the device, wait 10 minutes before switching it on again. This prevents
the compressor from being damaged.
28. Never connect the device to an external timer or unplug it while the device is in
operation.
Installation
Make sure that the distance from the device is 20 cm away from walls and furniture, see the
illustration below.
Filter installation (Hepa and activated carbon filter)
Dissassemble the panel, see red arrow.
Remove the sealing from the filters. Place the filters into the device. The tab must be visible at
the front.
Install the panel.
5