Lightwave Link Plus L2 Mode D'emploi page 6

ndicator lights
green: Status normal
g green: Transmitting
en / amber: Linking mode
: Cannot contact server
d some help?
w.lightwaverf.com +44 (0)121 250 3625
All manuals and user guides at all-guides.com
3.1 Download & open the App
Download the Lightwave Link Plus App from the
App Store. Open the App and follow the instructions
and tutorials which will take you through the setup
procedure.
You can also use the Lightwave Web App to set up and
control your Link Plus. This is a more extensive platform
very suited to setting up and viewing large installs. This
can be accessed at www.lightwaverf.com.
3.2 Follow the in-app instructions
Once your Link Plus is set up, you will be able to register
multiple smartphones or tablets to control any number
of Lightwave devices in your home.
Setting up the App
HomeKit
You will also be able to control Lightwave devices via
HomeKit using the code below. To do this, open the
Home app on your iPhone or iPad, select the Link Plus
and manually enter the code.
Communication between iPhone,
touch and the HomeKit-enabled Link Plus is secured
by HomeKit technology. Controlling this HomeKit
enabled accessory automatically and away from home
requires an Apple TV with tvOS 10.3.2 or later or an
iPad with iOS 10.3.2 or later set up as a home hub.
Apple, iPhone, iPad and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
HomeKit is a trademark of Apple Inc.
xx-xx-xx-xx
3
iPad, or iPod