Publicité
Les langues disponibles
Les langues disponibles
PREPARATION FOR USE
All manuals and user guides at all-guides.com
SPEAKER CONNECTION
Place the speakers in convenient locations on either side of the unit. Usually a
distance of five to eight feet between speakers provides the best stereo effect, but
this may vary depending on the size and acoustics of the room. Locate the Right and
Left Speaker jacks on the rear of the unit and connect the speakers to these jacks.
CAUTION: Only connect the speakers which are supplied with the unit. The use of
any other or additional speakers may cause damage to the unit. Never operate the
unit without the speakers connected.
OPTIONAL CONNECTIONS
AUX IN JACK (REAR OF UNIT)
Insert one end of the audio cable (not included) into the LINE OUT jack on your
external audio unit and the other end into the AUX IN jack on the rear of this unit. To
listen to the external audio unit, turn both units on and this unit will automatically be
in LINE IN mode. The external audio unit's output sound will be heard through this
unit's speakers. It is suggested that you unplug the audio cable when you are not
listening to the external audio unit; otherwise, it cannot be changed to another
mode using the FUNCTION button.
HEADPHONES JACK
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to
this jack. The speakers are automatically disconnected when the headphone plug is
inserted in the jack.
7
Publicité
