Publicité
Les langues disponibles
Les langues disponibles
AC CONNECTION
Insert the small end of the AC
adapter into the DC 13.5V IN
jack (located on the rear of the
unit). Connect the AC cord to the
adapter and connect the other
end to a wall outlet having 120V
AC, 60Hz. AC Adapter, DC
13.5V Z
NOTES:
•
Remove both the DC plug and the AC-IN plug to disconnect the AC
adapter when not in use.
•
Only use the supplied AC Adapter which has the following specs:
DC 13.5V Z
REMOTE BATTERY INSTALLATION
Follow these precautions when using a battery in this device:
1.
Use only the size and type of battery specified.
2.
Be sure to follow the correct polarity when installing the battery as
indicated in the Battery Compartment. A reversed battery may cause
damage to the device.
3.
If the device is not to be used for a long period of time, remove the
battery to prevent damage or injury from possible battery leakage.
4.
Do not try to recharge a battery not intended to be recharged; it can
overheat and rupture. (Follow battery manufacturer's directions.)
POWER SOURCE
All manuals and user guides at all-guides.com
When using a 3-pronged plug
When using a grounding adapter, make sure the receptacle
1.
Remove the Battery Compartment (on the
bottom rear of the remote control) by
sliding the compartment out. (You can
insert a penny, or similar object, into the
groove on the compartment to help slide
it out.)
2.
Install a CR2025 battery, paying attention
to the polarity diagram in the Battery
Compartment (positive side up).
3.
Replace the Battery Compartment.
BATTERY PRECAUTIONS
6
3-pronged
Receptacle
3-pronged
Receptacle
plug
Box Cover
box is fully grounded.
Grounding Lead
Screw
Receptacle
Receptacle
Grounding
Box Cover
Adapter
Publicité
