This conversion kit shall be installed by a qualified service technician in accor-
dance with the manufacturer's instructions and all applicable codes and
requirements of the authority having jurisdiction. If the information in these
instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life.
The installation is not proper and complete until the operation of the converted
appliance is checked as specified in the manufacturer's instructions supplied
with the kit.
Complete parts list identifying all components provided in the kit.
Using The Cooktop
Lighting
• Simply press the knob in, turn counterclockwise to "LITE" position.
• Press the ignition device and hold the knob till the burner is ignited.
• Before releasing knob, ensure a flame is established.
• If the burner fails to ignite, put into off position and waite for at least 30 seconds
then try again.
Push the control knob in and turn
it to the LITE position.
Re-ignition
If the flame is out for certain reasons, the safety device will cut off the gas power
automatically. Turn the knob to "HI" position, then ignite again, you should wait for
30 seconds when you do that. Due to the air in the tong, there may be unsmooth
ignition, revolve the knob to "HI" position and ignite again.
1 (844) 538-7890
support@gaslandchef.com
WARNING
Fig.24
www.gaslandchef.com
8350 Patriot Blvd STE B, N. Charleston, SC 29418
Fig.25
18