Barrette UTILITY SCREEN Instructions D'installation page 3

1.
Remove all contents out of the box and take
inventory of all items.
2.
Assemble screen components on the ground/
floor. Place posts approximately 3
Place top and bottom rail, and 8 infill boards
(Fig. 1).
3.
Slide one end of top/bottom rail and infill boards
into opening routes on post (Fig. 2)
4.
Slide other end of top/bottom rail and infill
boards into opening on 2nd post to create screen
assembly (Fig. 3).
5.
Push posts together so that the horizontal infill
touches the outside wall of the posts.
⁄ feet apart.
1
2
Fig. 1
3 ⁄ '
1
2
Fig. 2
Fig. 3
3