Publicité
Les langues disponibles
Les langues disponibles
EN
OPERATION GUIDE
5. Electing a Preset Programmed Massage
DEMO, Gentle, Neck & shoulder, Relax, Lower back, Vigorous, Cradle massage.
Automatic programs combine shiatsu, kneading, tapping and air massage.
Button
Description
DEMO massage
program
Gentle massage
program
Neck & shoulder
massage program
Relax massage
program
Lower back
massage program
Vigorous massage
program
Cradle massage
program
• For above programs, the fixed time is 15 minutes and the default of airbag
intensity is low.
• The above automatic full-body massage courses can not be combined with
other programs.
08
Main function
Press for a 7-minute demonstration of all available
massage techniques.
Kneading massage, air massage and tapping
massage. The recline of the backrest can be
adjusted during the massage.
Kneading and beat massage program. The angle
of backrest cushion and leg rest cushion could be
adjusted during the process.
This course combines mainly with quick
kneading,tapping and air massage. The angle of
backrest cushion and leg rest cushion could be
adjusted during the process.
Kneading and scraping massage program.
The angle of backrest cushion and leg rest
cushion could be adjusted during the process.
A slower pace massage, delivering a soothing
intensity with full airbag massage.
This course combines mainly with cradle massage.
The angle of backrest cushion and leg rest
cushion could be adjusted during the process.
OPERATION GUIDE
Manual setting course
Introduction of manual setting course
Partial air massage is the course which targets different needs and areas of
body.
Button
Description
Press button one time to start kneading massage.The
Kneading
speed is adjustable.
Press two times to start the knead-knocking
Knocking
massage.The speed is adjustable.
Press three times to start the knocking massage.The
Knead-Knocking
speed and width is adjustable.
Press four times to start the tapping massage. The
Tapping
speed and width is adjustable.
Shiatsu massage.
Shiatsu
• The above manual setting course could not be combined with other courses.
• For the above manual setting course, the default setting for the massage is
spot-specific with medium width. Speed and width are adjustable by pressing
relative button.
Function introduction for manual setting course
Button
Description
There are five levels to choose.
Speed adjustment
There are three levels to choose from narrow,medium
Width adjustment
and wide.
Partial massage/Press the button one time the rollers
Spot
will stay in one locatio
Press two times to start the partial massage. The third
time to start full course massage.n.
Massage roller move
Press down the button to move massage roller,
up
release the button to stop.
Massage roller move
down
EN
Main function
Main function
09
Publicité
