Publicité
Les langues disponibles
Les langues disponibles
HPN10V
Before any electrical connection is made, it is necessary to be sure that the power
supply cable conforms to the manufacturers stated requirements.
Before proceeding with any maintenance, service or reparation work, the product must
be isolated from the main electric supply terminal. Only qualified personnel should
carry out these tasks.
The manufacturer is released from any responsibility concerning damage caused by
non-compliance to the provided instructions, errors of handing, installation or usage.
You shouldn't install the heat pump in corrosive background, close to the sea, exposed
to salt fog, near a chlorine storage room or other corrosive chemicals.
This handbook can be modified without notice.
Storage, shipping and packing
Appliance must be packed and stored vertically, as specified on the packing.
A horizontal storage, even if temporary, will damage the appliance.
All damage due to incorrect packing or storage,will not be taken under warranty.
The manufacturer rencourages its customers to keep the heat pump packaging
(paperboard pack + polystyrene + pallet) for the duration of the warranty period in case
of a need to return the appliance to the factory.
Standards
CE standard conformity
HPN pool heat pumps meet the following standards:
• Electromagnetic compatibility:
• Safety requirements for low voltage equipment:
• Pressure Equipment:
• Noise production:
• Harmonized standards:
Electrical connections
French standard installation reference:
Correct packing and storage position.
- 31 -
2004/108/EC
2006/95/EC
97/23/CE
200/14/CE
NF EN 60335.1,2.40
NF C 15 100.
Publicité
