❺
❾
❿
⓫
⓬
⓭
⓮
For MANUAL mode the alarm input that triggers the recording, the "motion" alarm that triggers the recording, and the programmer timer must be
set for each video camera.
To set up the recording options more precisely, press the icon
Press the OK button to save the settings.
All manuals and user guides at all-guides.com
❷
❸
❹
❻
Adding video cameras
Pressing button
are in the same local network as the NVR.
Press button
❸
Select
to add all the video cameras in the list.
Press button
the list. Press button
added to the list.
If the IP video camera you want does not have an IP address
❼
that is in the same network segment as the NVR, select the
device and press the
❻; select the video camera with the new address and press
the
button to add it to the list.
By pressing the
IP video camera so as to make it easier to recognise.
The video cameras connected directly to the NVR's PoE ports
❽
are addressed and managed automatically.
Press the NEXT button to continue with setup.
Recording settings
Two recording modes are available: AUTOMATIC and
MANUAL.
Choose one of the options available for AUTOMATIC mode:
❾
Recording is activated if the video camera detects motion
within a pre-set area of the image.
❿
Recording is activated following the activation of an
alarm input.
⓫
Recording is activated when the conditions described in
❾
points
and
⓬
Recording always on; if the video camera detects motion
within a pre-set area of the image an alarm is triggered.
⓭
Recording always on; if an alarm input is activated an
alarm is triggered.
⓮
Recording always on; if an alarm input is activated or if
the video camera detects motion within a pre-set area of the
image an alarm is triggered.
Press the OK button to save the settings.
⇨ Settings ⇨ Record.
❷
updates the list of IP video cameras there
to add the video camera you want.
to delete one of the video cameras added to
❹
to delete all of the video cameras
❺
icon
to change the IP address
❼
icon
you can associate a name to the
❿
occur.