Télécharger Imprimer la page

Black & Decker KE2900 Serie Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

How to Use
This appliance is for household use only.
BEFORE USING YOUR KETTLE
Remove all packing materials, any stickers and the plastic band around the power plug.
To register your product, go to www.prodprotect.com/applica.
• Wash all parts as instructed in CARE AND CLEANING section.
• Select a level surface where this unit is to be used allowing enough space for steam to
escape without damage to counters, cabinets and walls.
• Fill kettle to maximum fill line with cold water. Bring to boil, discard and repeat. Kettle
is now ready for use.
Note: The kettle only operates when placed on the base with the ON/OFF (I/O) button in
the ON (I) position. The kettle automatically shuts off when water has boiled or there is no
water in the kettle.
Important:
• Do NOT fill the kettle with any substance other than water. Heat water only.
• Do NOT operate the kettle without water.
• Do NOT operate the kettle without the filter in place.
• Do NOT overfill the kettle. (Keep water level below the max fill line on the water window.)
FILLING THE KETTLE
1. Remove the kettle from the base.
2. Pull lid handle up to remove the lid.
3. Make sure the removable filter is in place.
To install: put filter in kettle, aligning the filter circle with
the inside/back of the pour spout. (A) Squeeze together the V
shaped plastic at the top of the filter and slip the tab under the
rim of the kettle opening. Installed position: (B)
4. Fill with desired amount of cold tap water. Use the water level
tabs inside the kettle as a guide for 1 to 3 cups of water. Use
the water window on the outside of the kettle as a guide for 4
cups up to 1.7 liters (7 cups).
5. Put the lid back on the kettle.
6. Unwind cord from base.
7. Place the kettle securely on the base.
BOILING WATER
1. Plug cord on the base into standard electrical outlet.
2. Press the On/Off (I/O) switch to the On (I) position. The power
indicator light turns on and the water begins to heat.
3. When water boils, the kettle and the power indicator light will automatically turn off.
Note: You can also turn the appliance off at any time by lifting the ON/OFF (I/O) switch to
the OFF (O) position.
All manuals and user guides at all-guides.com
A
B
5

Publicité

loading