Publicité
Les langues disponibles
Les langues disponibles
Noni - 1.5" Recessed Ceiling Prep
FIGURE 3
SUSPENDED CEILING
FIGURE 5
MOUNTING BRACKET ADJUSTMENT
STEP 3
Adjust height as needed by loosening screws on mounting bracket (figure 5).
STEP 4
Ensure aperture plate is locked in place prior to cutting hole in ceiling. For square applications,
rotate aperture plate to align with desired building feature. Use inside radius of rolled edge on
housing as a cutting guide for aperture hole in ceiling (figure 6).
INST-KV NONI 1.5in REC CEILING PREP
TITLE
04/06/22
DATE
93147493
DWG NO
SAFETY WIRE
HOLES
MOUNTING TAB
MOUNTING BRACKET
SCREW
SLIDE
MOUNTING
BRACKET
AS REQUIRED
FIGURE 6
REV
kurtversen.com | 781-294-0100 | techsupport@kurtversen.com
NAIL
WOOD JOIST
ROLLED EDGE
APERTURE PLATE
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY
FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED
HEREIN. IF YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR
2
THE INSTALLATION OF IT, PLEASE CALL KURT VERSEN ENGINEERING AT
781-294-0100
HINGED
MOUNTING
BAR
FIGURE 4
3 of 6
Publicité
