INSTRUCTION SHEET
SURFACE MOUNT
IMPORTANT: PENDANT BRACKET MUST BE INSTALLED PRIOR TO CEILING INSTALLATION
FOR USE WITH CEILING THICKNESSES 5/8" TO 1-1/4"
ALL WIRING CONNECTIONS SHALL BE WITHIN JUNCTION BOX
IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Follow label
information and instructions concerning Wet or Damp Locations, installation near combustible materials, insulation,
building materials and proper lamping. Do not install in areas subject to combustible vapors or gases. Before wiring to
power supply and during servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping
must be performed by qualified service personnel. Product must be grounded to avoid potential electric shock
or other potential hazard. Product must be mounted in locations and at heights and in a manner consistent
with its intended use and in compliance with the National Electrical Code and local codes. The use of accessory
equipment not recommended by the manufacturer or installed contrary to instructions may cause an unsafe condition.
Do not block light emanating from product in whole or part, as this may cause an unsafe condition. Do not allow items
such as drapes, curtains, screens or the like to come into contact with the product or to block light from the product, as
this may cause an unsafe condition.
CAUTION: DO NOT ATTEMPT TO MODIFY OR REWIRE FACTORY-INSTALLED WIRING ON THE FIXTURE.
SAFETY AND PROPER OPERATION OF THE FIXTURE DEPEND ON THE INTEGRITY OF THE WIRING.
INST KV NONI 2.5/3.5in CYL CS SU
TITLE
03/02/22
DATE
93147484
DWG NO
VIOLET/WHITE (E1)
VIOLET (E2)
ONLY USE FOR
ECOSYSTEM DIGITAL CONTROL
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY
REV
FASHION WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED
HEREIN. IF YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR
2
THE INSTALLATION OF IT, PLEASE CALL KURT VERSEN ENGINEERING AT
781-294-0100
kurtversen.com | 781-294-0100 | techsupport@kurtversen.com
0-10V DIMMING CIRCUIT
CANOPY/FIXTURE
REFERENCE ONLY
1 of 8
JUNCTION BOX
VIOLET (DIM+)
GRAY/PINK (DIM-)
ONLY USE FOR