Zyxel G-4100 v2 Guide De Démarrage Rapide page 11

2 Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the G-4100 v2
with the connection cables.
3 Adjust the cables.
4 Hang the G-4100 v2 on the screws.
7 Troubleshooting
Problem Corrective Action
None of the LEDs Make sure that you have the correct power adaptor connected to the G-4100 v2 and plugged
turn on. in to an appropriate power source. Check all cable connections.
If the LEDs still do not turn on, you may have a hardware problem. In this case, you should
contact your local vendor.
ENGLISH
11