Publicité
HINTS FOR BETTER RECEPTION
1. AM: THERE IS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY
ROTATING OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM
RECEPTION.
2. FM: THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR
CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST
RECEPTION.
FM & FM-STEREO RADIO ENCODING
1. PRESS FUNCTION BUTTON TO SELECT RADIO MODE AND SELECT THE DESIRED
BAND BY RADIO BAND BUTTON (AM OR FM).
2. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
3. PRESS THE REC BUTTON, THEN USB OR SD ICON WILL BE FLASHING.
4. PRESS SKIP UP
(USB OR SD) FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM.
AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDSS.
5. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
6. THE "REC" WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
7. TO FINISH ENCODING, PRESS STOP
DISAPPEAR.
8. TO HEAR NEWLY ENCODED TRACK:
• P RESS FUNCTION BUTTON TO SELECT USB OR SD MODE.
• P RESS SKIP UP
NEWLY ENCODED TRACK.
• T HE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/
SD.
• D URING PLAYBACK FROM USB OR SD, PRESS REC BUTTON TO SWITCH BETWEEN
TRACKS ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD)
ORIGINALLY.
REMARK:
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLAYING TIME OF
FM RADIO
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
- DURING FM & FM-STEREO RADIO ENCODING, RADIO FREQEUNCY IS FXIED AND
CANNOT BE TUNED
PHONO & ENCODING
NOTED:
- REMOVE THE STYLUS PROTECTOR.
- BE SURE THAT THE TONE ARM IS BEING DETACHED
FROM THE TONE ARM REST BEFORE OPERATING AND
RE-SECURED AGAIN AFTERWARDS.
All manuals and user guides at all-guides.com
BUTTON OR SKIP DOWN
I
BUTTON OR SKIP DOWN
I
EN
BUTTON TO SELECT DESIRED MODE
I
BUTTON OR REC
¡
I
19
BUTTON , "REC" WILL
˜
BUTTON TO SELECT THE
Cartridge
Stylus
assembly
Publicité
