Publicité
SLEEP FUNCTION
1. PUSH THE POWER KNOB TILL THE STANDBY INDICATOR LIGHT OFF. UNIT IS TURNING
FROM STANDBY MODE TO OPERATION MODE.
2. WHEN THE UNIT IS IN OPERATION MODE, PRESS SLEEP BUTTON REPEATEDLY TO
CHOOSE THE SLEEP TIME MINUTES FROM 90>80>70.....>10 OFF.
3. SLEEP TIME SETTING IS STORED WHEN THE "SLEEP" ICON LIGHTS UP ON THE
DISPLAY.
4. WHEN THE SLEEP TIME MINUTES IS OVER, UNIT WILL BE SWITCHED TO STANDBY
MODE AUTOMATICALLY.
5. PRESS SLEEP BUTTON ONCE WHEN THE "SLEEP" ICON LIGHTS UP ON THE DISPLAY,
USER CAN CHECK HOW MANY MINUTUES LEFT BEFORE UNIT SWITCH TO STANDBY
MODE.
LISTENING TO AM/FM RADIO
AM/FM RADIO TUNING
1. PRESS FUNCTION BUTTON TO SELECT RADIO MODE.
2. SELECT THE DESIRED BAND BY RADIO BAND BUTTON (AM OR FM).
3. TUNE TO THE REQUIRED STATION BY PRESSING SKIP UP
BUTTON FOR 1-2 SECONDS, AND THEN RELEASE.
4. THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP WHEN A RADIO STATION
IS FOUND.
AUTO PRESET AM/FM RADIO STATIONS
1. DURING RADIO MODE, PRESS THE PLAY/PAUSE
AUTOMATICLLY SCAN THE RADIO FREQUENCY. WHEN THE CLEAR SIGNAL IS FOUND,
IT WILL AUTOMATICALLY STORE THE RADIO STATION, STARTING FROM "CH 01".
2. THE NUMBER OF STATIONS CAN BE FOUND AND STORED IS DEPENDED ON THE
RECEPTION OF DIFFERENT AREA AND COUNTRIES.
3. AFTER AUTO-SCANNING, PRESS PRESET DOWN OR PRESET UP BUTTON TO SELECT
DESIRED STATION.
MANUAL PRESET AM/FM RADIO STATIONS
1. DURING READIO MODE, WHEN DESIRED FREQUENCY IS FOUND, PRESS MODE
BUTTON. THIS PARTICULAR FREQUENCY WILL BE STORED IN THE UNIT.
2. PRESS PRESET DOWN OR PRESET UP BUTTON TO SELECT DESIRED STATION.
NOTE: MIXIMUM STORAGE: 30 STATIONS FOR FM, 20 STATIONS FOR AM.
FM & FM-STEREO RECEPTION
• PRESS "FM ST. " BUTTON ON THE REMOTE CONTROL TO SELTECT FM MONO OR FM
STEREO MODE. WHEN STEREO SIGNAL ARE WEAK. IT IS PREFERABLE TO RECEIVE THE
PROGRAM IN MONO.
• "ST" ICON LIGHT UP ON THE DISPLAY TO SHOW FM STEREO MODE IS RECEIVING.
EN
All manuals and user guides at all-guides.com
18
OR SKIP DOWN
I
BUTTON, THE UNIT WILL
I I
I
Publicité
