Orbit XTRA DIGITAL-XD 300 Mode D'emploi page 18

7. Troubleshooting
ENGLISH
Before requesting service for this Set Top Box, check the chart below for a possible cause of the problem
you are experiencing. Some simple checks or minor adjustment on your part may eliminate the problem
and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve
the problem, consult Orbit services.
Symptom Remedy
No power Insert the AC mains lead securely into the AC mains supply.
No picture Ensure that the equipment is connected properly.
No sound • Ensure that the equipment is connected properly.
• Ensure that the input setting for the TV and stereo system are
correct.
• Adjust the master volume of the Set Top Box and/or the TV set.
No operation can be performed • Check the batteries are installed with correct polarities.
with the remote control • The batteries are depleted: replace them with new ones.
• Point the remote control unit at the front panel and operate.
• Operate the remote control unit at a distance of not more than
7 m from the front panel.
• Remove the obstacles between the remote control unit and the
front panel.
You forgot your PIN code Contact Orbit services.
Error number displayed on the Contact Orbit services.
front panel display
For others problems Contact Orbit services.
GB Chapitre 07.p65 16
All manuals and user guides at all-guides.com
16
7. TROUBLESHOOTING
28/05/01, 18:37