Lutron QS Timeclock Guide D'installation Et D'utilisation page 9

Programming Mode
Entering and Exiting Programming Mode
To enter programming mode:
Main menu
Press and hold the top and bottom
Timeclock
programming buttons simultaneously for
CCI setup
3 seconds. The LEDs in the scene buttons
will scroll from top to bottom, confirming
that you are in programming mode, and the
info screen will display the main menu.
To exit programming mode:
Press and hold the top and bottom
programming buttons simultaneously for
3 seconds.
Navigating Menus in Programming Mode
Master Buttons
The Master buttons allow you to move through the menu
choices. The current choice is highlighted on the info screen.
OK Button
The OK button chooses the current highlighted menu choice.
This will either take you to the next menu or accept a setting you
have selected. When the screen displays a Yes / No question, the
OK button is "Yes".
Timeclock Button
The timeclock button functions as a "back" button during
programming mode. Pressing the timeclock button takes you
back one step in the current menu. Pressing it repeatedly
will eventually return you to the main menu, but will not exit
programming mode. When the screen displays a Yes / No
question, the Timeclock button is "No".
®
All manuals and user guides at all-guides.com
1 2 3 4 5 6
QS Timeclock Installation and Operation Guide 9
Master buttons
OK
OK button
Timeclock (back) button
Press and hold the top
and bottom buttons for
3 seconds to enter or exit
programming mode