Publicité
Les langues disponibles
Les langues disponibles
3. Control panel
NOTICE! Only switch on the lights while the appliance is operating. Do
not switch on the lights to lighten the room.
1. After connecting the appliance to the power supply, the time of day should be
set. You can set the time when the appliance is not operating.
2. Touch the on/off sensor once.
3. Touch and hold the timer sensor until the hour digits of the LED display flash.
4. Use the speed sensor to increase the hour-digit displayed on the LED or the
light on/off sensor to decrease the hour-digit.
5. When the correct hour-digits appear on the LED display, touch and hold the
timer sensor until the minute-digits of the LED display flash.
6. Use the speed sensor to increase the minute-digit displayed on the LED or the
light on/off sensor to decrease the minute-digit.
7. When the correct minute-digits appear on the LED display, touch the timer
sensor a third time to confirm the time of day.
1. When the hood is operating you can set a particular working time. You can
programme the timer from 5 to 60 minutes. The appliance will stop running
automatically when the programmed period of time has been elapsed.
2. To programme a working time touch the timer sensor once. The LED display
will show "05.00".
3. Touch the speed sensor repeatedly to increase the working time by one minute.
To reduce the working time by one minute, touch the light on/off sensor.
1
Activates the timer function
2
Switches the light on/off.
3
LED-display
4
Touch once: lowest setting.
Touch twice: medium setting.
Touch 3 times: highest setting.
Touch 4 times: reset to lowest setting.
5
On/off
Setting the time of day
The timer function
32
Publicité
