Télécharger Imprimer la page

Casselin CPDSCS600 Mode D'emploi page 14

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger due to electric current!
• No contact with heat sources should take place with the electrical cord.
• The cord should not hang over the edge of a table or counter.
• Do not pour water into an appliance that is in operation or still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
COMMISSIONING
The device must be completely removed from its packaging and the protections must be completely removed.
Place the device on a solid, stable, flat and non-flammable surface.
Do not lean the device against the wall.
Do not install the device near open fires or other heating devices.
It is forbidden to place flammable objects on or near the device.
Make sure that all ventilation openings are not blocked.
Make sure the device is positioned for optimal use.
The device must be electrically protected upstream with an appropriate safety device.
The device must be plugged directly into a wall socket and not into a power strip.
Let the appliance warm up for 15 minutes before first use.
MANUAL
Salting station:
Put your cooked fries in the tray.
Switch on the device, the lamps and the power-on indicator light up.
Press ON/OFF button
Turn the thermostat knob to the desired temperature to heat up the fry pan.
If you don't use it, just press OFF
Sauce warmer:
Press ON/OFF button
Turn the thermostat knob to the desired temperature for each sauce warmer
If you don't use it, just press OFF
EN

Publicité

loading

Ce manuel est également adapté pour:

Cpdscs800