Publicité
INSTALL LEGS
There are 6 "I" screws per leg. The fifth & sixth screw is installed on the top
of the leg as shown above.
Install legs by having one person hold leg and other person fasten with "I"
screws.
Please note that the leg has a long side and short side - the long side with
caster brake faces the front of the unit.
After legs have been securely fastened to stand, use two-people lift to stand
to upright position.
XL Fixed Height, Mobile Stand Designed for 85" Surface Hub 2S
Using four 5/16 - 18 x .75 Button Head Screws, attach the first Leg to the Stand in the orientation shown,
with the longer Leg containing the caster brake facing forward. Repeat these steps to attach the second Leg.
Once both Legs are securely fastened to the Stand, use two people to lift the Stand to the upright position.
L
www.salamandercommercial.com
I x 12
501-692/MS [10.22]
page 5 of 21
Publicité
