Publicité
Waiting for Acktone
Failed No Acktone
Reporting Event Now
Waiting for Kissoff
No Kissoff
Passed: Manual test
9.6
Config Info (Command-Menu)
Configuration type:
Factory default
Press down arrow key to see more
information.
Job Name:
No job loaded
Technician ID:
Unknown
Press down arrow key for further info.
Cfg. Date and Time:
hh:mm day year:mm:dd
Press down arrow key for further info.
22
Waiting for availability of the receiver. The
receiver confirms the availability by sending an
Ack tone.
Dialer failed to detect Ack tone. This message
indicates that either the telephone number may
be wrong or the receiver is not available.
Sending events to the receiver.
The dialer is waiting for the Kissoff tone. The
Kissoff tone indicates that the receiver has
received the event reports.
No Kissoff means dialer did not detect Kissoff
tone.
The line passed the test; everything is OK.
Configuration type will show how the panel was configured.
"Factory default" means the panel has not been configured, it is as
it came from the factory. "Front Panel" means it was configured at
the panel. "Serial Port" means the configuration was done from a
computer through the serial port. "Modem" means the
configuration was completed remotely through a modem.
If you upload a job configuration to the panel using the PC
configuration utility, the job name will appear on this screen. The
job name can be up to a maximum of 20 characters.
If you upload a job configuration to the panel using the PC
configuration utility, the technician's name (ID) will appear on this
screen. The technician ID can be up to a maximum of 10
characters.
Configuration date and time will appear for all means of
configuration, thus revealing date and time configuration was last
changed.
Keypad Configuration & Operation
Publicité
