Publicité
Les langues disponibles
Les langues disponibles
Instructions for Use
Brewing Single-Serve Ground Coffee
For the pod coffee system to work, the Cup
IMPORTANT:
Rest must be in the downward position (G).
1.
Make sure your appliance is plugged in.
2.
Ensure the Water Reservoir is filled with a minimum of 20 ounces of
water. Do not fill the Water Reservoir past the "MAX" fill line.
Use spring water or filtered water. Distilled water
NOTE:
lacks the minerals necessary to bind to the elements of
coffee. Filtered water will limit impurities and excessive
minerals that can detrimentally impact coffee flavor and
machine performance.
3.
Open the hinged lid.
4.
Ensure the Pod Holder is installed properly in the Removable Filter
Holder. The tab on the Pod Holder should align with the groove on
the Filter Holder (H).
5.
Place the Filter Holder into the appliance, taking care to align the
tabs properly (I). Press down until you hear a click.
6.
Fill the reusable single-serve filter with your desired amount of
coffee grounds (1 tablespoon per brewed cup or to taste).
7.
Close the Reusable Filter's lid and place the Reusable Single-Serve
Ground Coffee Filter into the Pod Adapter. (J).
8.
Push the lid down until it locks in place. This will ensure the Filter
Basket's lid does not lift open during brewing.
9.
Place your mug on the cup rest.
10.
To start the brewing cycle, press your choice of brew size.
11.
Once the brewing cycle is complete, the appliance will automatically
shut off.
12.
When cooled, carefully dispose of the used grounds and wash the
reusable filter for future use.
The Carafe Plate will be hot after single-serve
WARNING:
brewing. Allow the appliance to cool before touching the Cup
Rest or Carafe Plate.
G
H
I
J
11
Publicité
