OXO (T)Box G2 Mode D'emploi page 8

8. Control Mode
1 DMX-512
With this menu, you can monitor the total DMX packet of the fixture and test the DMX data
signal received from the connected DMX fixture or send to the connected DMX fixture.
• Turn the jog wheel to select DMX-512 test in the main menu.
• Press the jog wheel to open the menu.
• The display shows:
• Select one of the 3 submenus DMX 512 Analyser, DMX 512 Rx or DMX 512 Tx.
1.1 DMX 512 Analyser
• Turn the jog wheel to select DMX 512 Analyser in the DMX-512 test menu.
• Press the jog wheel to open the submenu.
• When no signal is received, the display shows:
• If no signal is received, please check the cables and connections.
• If all cables are connected properly and there is a DMX signal, the display shows the specifi-
cation of the DMX signal, for example:
User Manual - [T]Box G2
V1.2 11/2021 8/52