OXO (T)Box G2 Mode D'emploi page 7

7. Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product
specification voltage. Do not attempt to operate a 120V specification product on 230V power, or
vice versa. Connect the device to the main power supply.
Main Menu Option
• Turn the jog wheel to select one of the following menu options:
• Once you have chosen your desired menu, press the jog wheel to open the desired menu.
• If you want to choose one of the submenus, turn the jog wheel.
• Press the jog wheel again to select the desired submenu.
• The display will now show the submenu screen.
• To return to the previous step you have to choose Exit in the submenu.
• You can repeat steps 1-6 to navigate through all the existing menus .
WARNING!!!
Display Off after 30 seconds-30 minutes
When no button is pressed for 30 seconds, 1 min, 2min, 5 min, 1O min or 30min, the display
will turn off. You con set this time in menu System setup, see page 18.
To light up the display, you have to press or turn the jog wheel.
Once you have pressed or turned the jog wheel, the display will light up .
User Manual - [T]Box G2
V1.2 11/2021 7/52