Télécharger Imprimer la page

Samsung HW-N950 Manuel D'utilisateur page 24

Masquer les pouces Voir aussi pour HW-N950:

Publicité

Les langues disponibles

Les langues disponibles

Press the p button to pause a music file temporarily.

Press the button again and the music file plays.
Play / Pause
(BT/Wi-Fi)

Up/Down/
PAIR
Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
SOUND
MODE
• Music Skip
• Anynet+ / Auto Power Link
VOL
WOOFER
• ID SET
You can select from TREBLE, BASS, SYNC, CENTER LEVEL, SIDE LEVEL, FRONT TOP

LEVEL, REAR LEVEL, REAR TOP LEVEL or VIRTUAL ON/OFF.
• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound
Sound Control
• To control the volume of the each speaker select CENTER LEVEL, SIDE LEVEL or
• If the video on the TV and audio from the Soundbar are not synchronised, select SYNC
• If Surround Speakers are connected, select REAR LEVEL or REAR TOP LEVEL, and then
• SYNC is only supported for some functions.
SOUND
MODE
Press the indicated areas to select Up/Down/Left/Right.
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are turned on and turned off by the Right and Left
buttons respectively.
– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
you can control your Soundbar with a Samsung TV remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
– Auto Power Link : If the Soundbar is connected to your TV through a digital optical
cable, the Soundbar can automatically turn on when you turn on your TV. Press
and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
– Anynet+ / Auto Power Link are set to ON by default.
Press and hold the Up button for 5 seconds to complete ID SET.
Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons.
FRONT TOP LEVEL in Sound Settings, and then adjust the volume between -6~+6 by
using the Up/Down buttons.
in Sound Control, and then set the audio delay between 0~300 milliseconds by using
the Up/Down buttons.
use the Up/Down buttons to adjust the volume within a -6 to +6 range. The REAR
SPEAKER function can be turned VIRTUAL ON/OFF by using the Up/Down buttons.
PAIR
ENG - 20

Publicité

loading