JessEm TA FENCE 04500 Manuel Du Propriétaire page 6

The Tracks of the TA Fence are slotted to allow for vertical adjustment to ensure the fence
tracks are perfectly flush with the table top.
Step 2: Levelling the Tracks to the Table Top
a. Turn your top right side up on the 2" spacers or
you can now mount the top to a stand.
Place the fence on the table top in its upright
b.
position and allow it to hang over the table edge
and lie across the front end of the fence track.
c.
Loosen the (3) 1/4-20 x 5/8" Socket Head Cap
Screws. (Part #9) in the track assembly and raise
the fence track assembly so that it is flush with
the bottom of the fence. See Figure 3
d.
With the 3/16" hex key provided, tighten the
front screw.
e.
Move the fence back of the table and use it to
position the rear end of the track in the same
way and tighten of the rear screw. See Figure 4
f.
Tighten the center bolt to complete the leveling
of the fence track. Repeat step 2 to level the fence
track on the other side of the table.
Check that the tracks are flush with the table top
g.
and readjust as necessary
All manuals and user guides at all-guides.com
Figure 3
Figure 4
6