JessEm TA FENCE 04500 Manuel Du Propriétaire page 4

Hardware and Assembly Tools
QUANTITY AND CONTENTS OF
PACKAGING
(1) - TA Main Fence Assembly
(2) - Fence Adjustment Knob Assemblies
(1) - Fence Guard Mount
(1) - Guard Adjustment Shaft
(2) - Track and Mounting Brackets
TOOLS REQUIRED FOR ASSEMBLY TO A
JESSEM TABLE
(1) JessEm T-25 Torx Screwdriver (supplied)
(1) 3/16" Hex Key (supplied)
(1) 1/8" Hex Key (supplied)
All manuals and user guides at all-guides.com
CONTENTS OF PACKAGING
Guard
(2) Track and (2) Mounting Brackets
HARDWARE INCLUDED:
(8) - 10-24 X 1/2" Torx Drive Type 23 Self Tapping
Screws, Zinc Plated
(Self Tapping screws have a flat notch on the
end to facilitate cutting into the phenolic)
(2) - Fence Knob T-Nuts x 2-1/2" Long
(2) - 10-24 x 3/4" Torx Drive Screws
(2) - Guard Adjustment Knobs
(4) - 10-24 x 1/2" Hex Nuts
(4) - 10-24 x 1/2" Torx Drive Screws Stainless Steel
(1) - JessEm T-25 Torx Screw Driver
(1) - 3/16" Hex Key
(1) - 1/8" Hex Key
4
(2) Knob and Knob Mount Assemblies
(1) Guard Adjustment Shaft and Mount
Main Fence Assembly