Black & Decker BD17212 Mode D'emploi page 7

4. Flip the base assembly upside down and
align with the holes on the bottom side of the
table (D). Attach the base assembly to the
table (D) with 8 washers (DD) and 8 M6x45
mm bolts (BB). Tighten securely with a Phillips
screwdriver.
BB
DD
5. Turn the table right side up. Place the fire
bowl (C) inside the table. Then, place the
wood grate (B) inside the fire bowl (C).
6. Place the mesh ring (A) onto the table.
D
Please make sure the metal tabs on the
mesh ring are inserted into the holes on the
tabletop.
Notice:
Please make sure that the legs of mesh ring (A)
are inserted into the holes on the table top.
B
C
D
7. Your fire pit is now ready for use. Keep the
poker (I) nearby to tend to your fire.
A
D
I
7