LD Systems DIO 04 Manuel D'utilisation page 8

PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner
immediately after purchase if the delivery is not complete or if it is damaged.
The packaging includes:
• 1 x DIO 04 Dante Break Out Box
• 1 set of terminal blocks
• 1 set of rubber feet (pre-assembled)
• 1 mounting set for on-table or under-table installation
• User manual
INTRODUCTION
Part of the TICA® series, the DIO 04 is a four output Dante interface that delivers the capabilities
that audio and AV professionals really need. Equipped with four balanced outputs to connect
to any analogue audio device such as power amplifiers Signal presence lights on each channel
speed installation and fault-finding.
Power from any PoE+ network switch or use the optional, external power supply. Since it comes
with two Dante networked ports, you can daisy chain devices together. It also works as a PoE+
injector: if you use the external power supply, you can power one further networked device in
the chain.
It's tiny form factor (106 x 44 x 222 mm) and included mounting plates allow it to be installed
discreetly behind screens or under tables. Alternatively, it fits into 1/3 19 inch rack.
Use the optional rack tray to slot up to three TICA® DIO series products alongside each other
and build a system to your exact requirements, using minimal rack space.
Terminal block connections on the analogue outputs make wiring easy.
The perfect solution for professional installers wanting to interface into Dante equipment.
Dante Domain Manager and AES 67 compliant.
FEATURES
• Four output Dante interface
• Connect Dante to line level audio equipment
• Terminal blocks for all analogue connecitons
• Signal indicators on each channel
• Use PoE or an external power supply
• Use as a PoE injector to power another networked device
• Daisy-chain Dante devices together
8