Publicité
Les langues disponibles
Les langues disponibles
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker
or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
Panels weighing more than recommended
may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (+j 1/16" (1.5 mm) tolerance.
Panels that are more than 1/4"(6.35 mm) thick must be routed. If
panels are less than 1/4"(6.35 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top grille panel should not weigh more than 10 Ibs (4.5 kg).
[
j ,',78oo,
Model
A
36
341/4'' (87.0 cm)
42
401/4'' (102.2 cm)
48
461/4'' (117.5 cm)
Door Panels for Non-dispenser
Models
The freezer panel should not weigh more than 40 Ibs (18.1 kg).
The refrigerator panel should not weigh more than 50 Ibs (23 kg).
Door Panels for Dispenser
Models
The freezer panel should not weigh more than 40 Ibs (18.1 kg).
The refrigerator panel should not weigh more than 50 Ibs (23 kg).
NOTE: Dispenser cut-out is centered left-to-right.
107/8"
141/4''
(36.2 crn)
A
333/4 ''
(85.7 crn)
Model
A
B
36
141/4 '' (36.2 cm)
191/4 '' (48.9 cm)
42
163/4 '' (42.6 cm)
223/4 '' (57.8 cm)
48
191/4 '' (48.9 cm)
261/4 '' (66.7 cm)
707/1e''
(179 cm)
Top Grille Panel - Routing Requirements
If the custom panels are thicker than 1/4"(6.35 mm), the top and
bottom edges of the top panel should be edge routed 1/2"(1.3 cm)
and %" (9.5 mm), respectively. Both ends should be edge routed
7/8"(2.2 cm) as shown.
(6.35 ram)
Top
max.
--
--
Grille
U
(6.36 ram)
341/8" (86.68 cm)
1/4"
(6.35 ram)
max,
Model
A
36
141/4 '' (36.2 cm)
191/4 '' (48.9 cm)
42
16%" (42.6 cm)
22%" (57.8 cm)
48
191/4 '' (48.9 cm)
261/4 '' (66.7 cm)
15
Publicité
