Publicité
Les langues disponibles
Les langues disponibles
2. MAINTENANCE & TROUBLESHOOTING
2.1 Care & Maintenance
●
Keep the Sound Controlled Walking T-Rex Kit clean by wiping it with a soft dry cloth.
●
Keep away from exposure to direct sunlight for extended periods and keep away from
direct heat sources.
●
Remove batteries when not in use for an extended time.
●
Do not drop on a hard surface or disassemble the unit.
●
Do not immerse in water.
●
Use a clean and soft cloth for cleaning.
●
Use fine sandpaper to polish the wooden parts.
●
Do not use window cleaning agent, aerosol spray, solvent, alcohol, ammonia etc., when
cleaning the Sound Controlled Walking T-Rex Kit.
2.2 Troubleshooting
If you are having problems with your Sound Controlled Walking T-Rex Kit
●
Turn the unit off.
●
Remove the battery cover and take out batteries.
●
Wait a minute for the power to dissipate.
●
Replace batteries and secure the battery cover.
●
Turn the unit on.
Symptom
T-Rex does not
operate
T-Rex can't
walk well
If this does not resolve your issue. Please contact ThinkGizmos via email:
and we will endeavor to resolve your problem as quickly as possible.
All manuals and user guides at all-guides.com
Cause
1. The power switch on the
battery box is off
2. The batteries are exhausted
or not installed correctly
3. The connector of M1 is not
well connected into M2
1. The thickness of the wood
pieces has little difference
help@thinkgizmos.com
Correction
1. Turn on the power switch on
the battery box
2. Replace batteries or check to
make sure polarities are correct
3. Re-insert the connector of M1
into M2 correctly
1. Please refer to the "tips" in
step 17 of Body page 2
4
.
Publicité
