EuroLite PAR-64 RGB DMX Changer de Couleurs Mode D'emploi page 23

DMX-protocol
Mode 1 - RGB
Channel 1 Characteristic
0 - 255 Red 0-100 %
Channel 2 Characteristic
0 - 255 Green 0-100 %
Channel 3 Characteristic
0 - 255 Blue 0-100 %
Mode 2 – Color & Brightness
Channel 1 Characteristic
0 Black (all off)
1 Red
34 Yellow
Green
66 – 69 *
101 Cyan
133 – 136 * Blue
168 Magenta
255 White (all on)
Channel 2 Characteristic
0 - 255 Dimmer 0 – 100 %
Mode 3 – Color Preset
Channel 1 Characteristic
0 Black (all off)
1 Red
34 Yellow
66 – 69 * Green
101 Cyan
133 – 136 * Blue
168 Magenta
255 White (all on)
* Intermediate values display color transitions.
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
23/48 00018983.DOC, Version 1.0