installing Memory Modules
.
the memory module has only one notch on the center and will only fit in the
right orientation.
2.
insert the memory module vertically into the diMM slot. then push it in until
the golden finger on the memory module is deeply inserted in the diMM slot.
you can barely see the golden finger if the memory module is properly in-
serted in the diMM slot.
3.
Manually check if the memory module has been locked in place by the diMM
slot clips at the sides.
iMportANt
*
in dual-Channel mode, make sure that you install memory modules of the same
type and density in different channel diMM slots.
to ensure a successful system boot-up, always insert the memory modules into
*
the diMM first.
Notch
Volt
MS-775
7