LiteHawk NEON AUTO Manuel D'instructions page 8

LiteHawk NEON AUTO - First Flight
When heading out to fly your model, it's important to always use common sense.
Do not fly in the following places: Near crowds or high voltage, near any obstacles, wind
speeds over C (3mph), thunder, rain or snow or between high buildings.
- Ensure nothing prevents the smooth running of the moving parts.
- Do not dismantle or tamper with this R/C product or its transmitter. The manufacturer and
distributor will accept no responsibility, expressed or implied, for accidents or injuries
caused as a result of dis-assembly, modification and/or usage against the instructions for
this product.
- Ensure that all batteries are correctly installed and that the Li-Po battery is fully charged
and in good condition.
- Do not touch ANY moving parts during operation.
LiteHawk NEON AUTO - Post Flight
- When you have finished using your LiteHawk NEON AUTO you should first disconnect the
Li-Po battery, then switch OFF the transmitter (press and hold power button for up to 3
seconds).
- If you do not plan on using the quadrocopter for more than 24 hours, it is recommended
that you recharge the battery fully before putting it away.
- Remember to allow the battery to cool 10-15 minutes before recharging.
LiteHawk Parts & Tech
There's nothing worse than buying a new toy, having a question, or needing a
replacement part, and then being left out in the cold. No worries! We pride ourselves on
the very best customer service!
We have all the parts you'll ever need to keep your new LiteHawk in tip top shape! Like
we always say, "accidents happen, even to the best of us"....with that in mind
www.litehawk.ca is available 24 hours a day, 7 days a week!
We ship your parts Same Day! Except weekends of course - that's when we are out
playing too!
LiteHawk Guarantee
All LiteHawk products have been tested and designed to perform as claimed out of
the box. If you have an issue with a product or part of a product please contact us
directly. We cover claims towards manufacturing defects. We know that there is
nothing worse than having a question or needing a replacement part and having
nowhere to go. LiteHawk is not responsible for covering the costs of replacement parts
or repair on products that have been damaged due to product use.
www.litehawk.ca
R