Publicité
Les langues disponibles
Les langues disponibles
_J_:,_,_
_;_
_
_ '_,_i_,,#l _ _
Temperature
is too warm
•
New installation? Allow 24 hours following installation for
the refrigerator to cool completely.
•
Door opened often or left open? Allows warm air to enter
refrigerator. Minimize door openings and keep door fully
closed.
•
Large load of food added? Allow several hours for
refrigerator to return to normal temperature.
•
Control(s)
set correctly
for the surrounding
conditions?
Adjust the control(s) a setting colder. Check temperature
in
24 hours. See "Using the Control(s)."
There is interior moisture buildup
NOTE: Some moisture buildup is normal.
•
Humid room? Contributes to moisture buildup.
•
Door opened often or left open? Allows humid air to enter
refrigerator. Minimize door openings and keep door fully
closed.
The ice maker is not producing
ice or not enough
ice
•
Refrigerator connected to a water supply and the supply
shutoff valve turned on? Connect refrigerator to water
supply and turn water shutoff valve fully open.
•
Kink in the water source line? A kink in the line can reduce
water flow. Straighten the water source line.
•
Ice maker turned on? Make sure wire shutoff arm or switch
(depending on model) is in the ON position.
•
New installation?
Wait 24 hours after ice maker installation
for ice production to begin. Wait 72 hours for full ice
production.
•
Large amount of ice recently removed? Allow 24 hours for
ice maker to produce more ice.
•
Ice cube jammed
in the ice maker ejector
arm?
Remove ice from the ejector arm with a plastic utensil.
•
Reverse osmosis
water filtration
system connected
to
your cold water supply? This can decrease water pressure.
See "Water Supply Requirements."
The ice cubes are hollow or small
NOTE: This is an indication of low water pressure.
•
Water shutoff valve not fully open? Turn the water shutoff
valve fully open.
•
Kink in the water source line? A kink in the line can reduce
water flow. Straighten the water source line.
•
Reverse osmosis
water filtration
system
connected
to
your cold water supply?
This can decrease water pressure.
See "Water Supply Requirements."
•
Questions remain regarding
water pressure?
Call a
licensed, qualified plumber.
Off-taste, odor or gray color in the ice
New plumbing
connections?
New plumbing connections
can cause discolored or off-flavored ice.
Ice stored too long? Discard ice. Wash ice bin. Allow
24 hours for ice maker to make new ice.
Odor transfer
from food? Use airtight, moisture proof
packaging to store food.
Are there minerals
(such as sulfur) in the water? A water
filter may need to be installed to remove the minerals.
18
Publicité
