Opale-Paramodels Backpack XXS3 Mode D'emploi page 19

All manuals and user guides at all-guides.com
Insert the propeller with the appropriate spacer.
The logo on the propeller must be facing forward.
It is important to always check the position of the
leading edge of the propeller. This one must always
be positioned towards the front of the chassis.
a reversed propeller will directly result in a lack of
power.
Mount the two back stays using CHC 3x8 screws and
locknuts.
Position 4 CHC 3x8 screws on the back frame. Do not
tighten as much as possible, leave a space of 4mm.
O p al e - Paramo d el s. co m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
19
contact@opale-paramodels.com +33(0)981 144 387