Télécharger Imprimer la page

HE SAN REMO Mode D'emploi page 15

Publicité

Les langues disponibles

Les langues disponibles

Washing (decalcification) of the San Remo!
If hard water is used, calcium may be deposited on the walls and pipelines of the
machine, for example, think of your showerhead or washing machine! In order to
combat this, we recommend that the San Remo be washed once a month to prevent
calcium deposits. You may do this in the following manner:
• Fill your water tank with a mixture of 10 parts water and 1 part vinegar to the
maximum level.
• Place a large mug under the coffee dispensing outlet and a large mug under the
hot water spout.
• Insert the plug into the device and switch on the machine.
• Wait until the indication lamp lights up.
• Allow the water to directly pass through by placing the switch in the Coffee
position (do not insert any coffee pads)
• After two-thirds of the water has run out, turn the selection switch to hot water
and allow it to run for around two minutes.
• After 2 minutes, turn the button to the off position and switch off the machine.
• Turn the button into the Coffee position and start the equipment again, and now
let half of the remaining water to run out.
• Now turn the button back to the Hot Water position and allow the same to run
through for 3 minutes and switch off the machine by turning the selection switch
to the off position and press the pull switch.
• Now switch the machine on again and let the rest of the water pass through the
coffee outlet by placing the rotary button in the Coffee position.
• Place the cups under the coffee outlet during the process if necessary, and in such
case do not forget to switch off the equipment.
• Thoroughly wash the water tank under the tap, ensure that no vinegar remnants
remain behind, which could affect the taste.
• Fill the tank and ensure that the mugs under the coffee outlet and hot water spout
are empty.
• Place the machine into the Coffee position and allow a full water tank to flow
through.
• Now fill the tank once again and set the equipment in the Hot Water position and
allow a full water tank to flow to the hot water.
• Pass a cloth over the equipment once more at the end, to clean it
All manuals and user guides at all-guides.com
15

Publicité

loading