HE SAN REMO Mode D'emploi page 13

Installation
Follow the steps given below in order to use your San Remo
optimally:
Water
Thoroughly wash the San Remo before use!
Allow at least one full tank to pass through the coffee
compartment and through the hot water spout as well.
Always use fresh water to maintain your "San Remo" quality
Coffee pads
Ensure that you always use fresh coffee pads. If you keep the
pads in an airtight condition, you will retain the quality of the
pads.
How do I make coffee?
Fill the extra large water tank with fresh water (1).
Switch on the machine by pressing on the On/Off button (2).
Place your cup under the tap for coffee (3).
Wait until the control lamp lights up (4).
Place the coffee pad in the holder (5)
Close the valve until it clicks shut.
Place the handle on the left of the device in the locked position (6)
(Ensure that it has been closed correctly!)
Turn the selection switch upwards to coffee (4).
Turn the selection switch to the Off [O] position when you have
enough coffee (4).
How do I make tea?
Fill the extra large water tank with fresh water (1).
Switch on the machine by pressing on the On/Off button (2).
Place your cup under the spout for tea (3a).
Wait until the control lamp lights up (4).
Turn the selection switch downwards to hot water (4).
Turn the selection switch to the Off [O] position when you have
enough water (4).
Tip! You can therefore automatically determine the strength of
the tea or coffee using the selection switch.
ATTENTION!
After you have placed the pad, you must place the handle over
the compartment in order to maintain the quality of your coffee
and to prevent overflowing.
All manuals and user guides at all-guides.com
13
1
.
2
3
4
5
6
3
a