Danby DDW1832ESS Manuel Du Propriétaire page 9

OPERATING INSTRUCTIONS
ON/OFF
Power on the machine by pressing the On/Off
button.
PROGRAM SELECTION
Select a suitable program by pressing the program
buttons.
DISPLAY
The display shows the total time of the selected
program and the time remaining.
DELAY
The start time of a program can be delayed for 1 - 24
hours. Pressing the + button once will delay the start
time for 1 hours. The display will show "1h" and the
display will show the program duration and delay
time alternately for 2 seconds. Continuing to press
the + button will increaste the delay duration. Press
the - button to decrease the delay duration.
To start the selected program with a delay, the
Start/Pause button should be pressed and the door
must be closed within 4 seconds.
Turning off the appliance after activating the delay
time will cancel the delayed start.
HALF LOAD
The half load option has 3 modes. The mode
selected will appear on the display screen.
• Press the button once for the upper half load
basket indicator.
• Press the button twice for the lower half load
basket indicator.
• Press the button three times for both the upper
and lower half load basket indicators.
• Press the button 4 times to remove all indicator
lights.
NOTE
If any of the half load option modes are selected,
the associated LED button will be lit.
HOT DRY/ ULTRA-HOT
Press once to add extra drying steps to a program
in order to obtain drier dishes. This option increases
the water temperature of the final rinse and duration
of the drying cycle.
Press twice to select ultra-hot. This function raises the
water temperature in the final rinse.
Press a third time to unselect.
HI-TEMP
Both the water temperature and the washing time
are increased.
SHORT WASH/SILENT
Press once for the short wash function. This function
decreases the duration of a program providing
more economical water usage.
Press twice for the silent function. This function is for
a more sensitive and silent washing operation. The
sound pressure level of the washing will be reduced.
Press a third time to unselect.
START/PAUSE
Open the door of the appliance. Select the
program and options. Press Start/Pause. Close the
door within 4 seconds and the program will start. If
the door is closed after the 4 seconds have expired,
the program will not start.
NOTE
Total time can change while a program is running
depending on the ambient temperature where the
appliance is installed, temperature of the water
when it enters the appliance, amount of dishes.
NOTE
If the door is opened while the appliance is running,
it will switch to standby mode. Press Start/Pause
button and close the door within 4 seconds for the
program to resume.
8