Domo MY VEGETABLE Mode D'emploi page 36

DO9171SP-DO9172SP
PARTS
1. Gear wheel
2. Blade cone
3. Lid with fill opening
4. Food pusher
5. Motor unit
6. On/off switch
7. Bowl
8. Cord storage in the bottom
of the appliance
3 different blade cones
1. Extra thin: cappellini
2. Thin: spaghetti
3. Wider: tagliatelle
USE
1. Place the appliance on a flat, stable surface.
2. Place the desired blade cone into the appliance.
To do this, remove the lid with fill opening
by turning it counterclockwise, and place the
blade cone into the gear wheel in the appliance.
Make sure that the cone and gear wheel are well
placed. The blade cone should nicely fit into the
gear wheel. Place the lid with fill opening back
onto the appliance and turn clockwise to fasten.
3. Place the bowl onto the platform below the
opening.
4. Make sure that the on/off switch is set to 'O' (= off). Plug in the appliance.
5. Prick the vegetable or fruit - peeled or not - onto the cross at the bottom of the
food pusher.
7
1
2
1
36
6
3
5
8
2
4
3