Probuilder 69350 Manuel D'instructions page 47

Additional safety instructions for
pneumatic tools
• Compressed air can cause severe injury.
• Always shut off air supply and disconnect
tool from air supply when not in use.
• Always disconnect the tool from the
compressed air supply before changing
accessories, making adjustments and/or
repairs, when moving away from an
operating area to a different area.
• Keep fingers away from trigger when
not operating the tool and when moving
from one position to another.
• Never direct compressed air at yourself or
anyone else
• Whipping hoses can cause severe injury.
Always check for damaged or loose hoses
or fittings.
• Never carry a pneumatic tool by its hose.
• Never drag a pneumatic tool by its hose.
• When using pneumatic tools, do not
exceed the maximum operating Pressure
(Ps max).
• Pneumatic tools should be powered by
compressed air at the lowest pressure
required for the work process to reduce
noise and vibration and minimize wear.
All manuals and user guides at all-guidesbox.com
•
•
Connection
a. Compressed air tool
b. Connector
c. Snap coupling
d. Compressed air hose
e. Connector
f.
g. Lubrication unit
h. Regulator
i.
j.
k. Compressor
Using oxygen or combustible gases for
operating pneumatic tools creates a fire
and explosion hazard.
Be careful when using pneumatic tools
as the tool could become cold, affecting
grip and control.
Snap coupling
Filter
Non-return valve
GB
47