POLTI vaporetto ECO PRO 3.0 Manuel D'instructions page 22

VT ECO PRO 3.0 - M0S11217 - 1P06:UNICO
CORRECT USE OF THE PRODUCT
This appliance is intended for internal domestic use as a steam
cleaner, in accordance with the descriptions and instructions
contained in this manual. Please read these instructions
carefully and keep them. If this manual is lost, it can be
consulted and/or downloaded from the website www.polti.com.
Never leave the appliance exposed to weathering.
Correct use of the product is only as detailed in this instruction
manual. Any other use may damage the appliance and
invalidate the warranty.
INFORMATION FOR USERS
Pursuant to European Directive 2012/19/EU, regarding electric
and electronic appliances, this appliance must not be dispo-
sed of with domestic waste, but sent to an official collection
facility. This appliance complies with EU Directive 2011/65/EU
The crossed-out bin symbol on the appliance indica-
tes that, at the end of its useful lifespan, the product
must be disposed of separately from other waste.
Therefore, at the end of its life, the user must hando-
ver the appliance to an appropriate collection centre for elec-
tric and electronic waste. Proper separate waste collection to
facilitate the subsequent recycling, treatment and environ-
mentally compatible disposal of the appliance helps to pre-
vent negative effects on the environment and human health,
and promotes recycling of the materials the product is made
of. Unlawful disposal by the owner involves the application of
the administrative sanctions envisaged by current legislation.
Polti S.p.A. reserves the right to change equipment or accessory
specification without prior notice.
Before leaving our factory all our products are rigorously tested.
This is the reason why your VAPORETTO may contain some
residual water in the boiler.
WHICH WATER TO USE IN THE BOILER
This appliance has been designed to function with normal
medium tap water between 8°F and 20°F. If the tap water
contains a lot of limescale use a mix composed of 50% tap
water and 50% demineralised water which is widely available
to purchase. Do not use pure demineralised water.
Warning: check the hardness of the water at the technical office
at your local council or the local water supplier.
If you only use tap water, you can reduce the formation of
limescale by using the special Kalstop limescale product,
distributed by Polti, and available for sale at all major domestic-
appliance stores and online at www.polti.com.
Never use distilled water, rain water or water containing
additives (e.g. starch, perfumes), or water produced by other
domestic appliances, by water softeners or filter jugs.
Do not use chemical substances or detergents.
All manuals and user guides at all-guides.com
06/08/2015 15.35 Pagina 22
1. PREPARATION FOR USE
1.1 Attach the pivoting wheels to the base of the appliance
applying pressure (1).
1.2 Unscrew the safety cap (2) and fill the boiler with 2l of water
(3)(if completely empty). Carefully screw the safety cap back
on (2), checking that it is fully tightened.
This operation must always be carried out when the boiler has
cooled and with the power cable disconnected from the mains.
1.3 Open the door of the built-in socket and insert the built-in
plug of the steam hose (4), pressing the specific button and
making sure that the hooking pin is inserted perfectly in the
specific locking hole on the socket.
1.4 Connect the cable plug to an earthed power supply of the
correct voltage(5).
Completely unwind the power cable before plugging it into the
mains and before use, and always use the appliance with the
power cable completely unwound.
1.5 Press the boiler switch ( ) and the accessories switch (
will light up together with the "steam ready" indicator light ( ).
1.6 Wait for the "ready steam" indicator light ( ) to turn off. The
appliance is ready for use.
2. CONNECTION OF ACCESSORIES
The Vaporetto accessories can be connected directly to the
handle of the steam hose or extension tubes as follows:
• Move the locking button on the accessory to the OPEN
• Attach the required accessory to the hand gun or to the
• Move the locking button back to the position CLOSED. (10).
• Check that the locking button has engaged and the accessory
is fully connected.
3. CLEANING FLOORS
3.1 Make sure that Chapter 1 has been followed and connect the
accessories as indicated in Chapter 2.
3.2 Connect the extension tubes to the steam hose and the floor
brush to the extension tubes.
3.3 Attach the supplied cloth to the floor brush, locking it in
| 22 |
WARNING: if steam is escaping from the safety cap, switch the
appliance off and unplug it from the mains. Wait for two hour for the
appliance to cool before unscrewing the cap and screwing it back on.
WARNING: Never leave the filling bottle or the funnel resting
on the mouth of the boiler, with the product connected to the
power supply, since this could cause burns.
WARNING: When first operating steam, there may be some
drops of water mixed with the steam due to temperature
imbalances. Direct the first jet of steam onto a rag.
position (10).
extension tube (10).
Before using the appliance on delicate surfaces, ensure that
the part in contact with the surface is free from foreign bodies
that could cause scratches.
)(6), which