Gazebo Penguin Yosemite Manuel D'instructions page 35

Step 8
J1
AA-1
AA
H
AA
8.1 Assemble the Main Roof Corner Supports (H) to the Short Connector (J1) on the Main Roof Center
Frame and the Corner Posts (A) using Bolts (AA) and Steel washer (AA-1). See Figure 8-1.
Note:You will need a second person to hold the Main Roof Center Frame while attaching the main Roof
Corner Support (H).
8.2 Repeat for all corners and Tighten all Bolts.
Note: diagonal measurements from corner to corner must be within 5mm of the same distance.
See Figure 8-2.
J2
AA-1
H
J1
H
Figure 8-1
J2
±5mm
H
Figure 8-2
35
C1
A
H
H
AA-1
AA