Polycom KIRK 5020 Guide Rapide page 13

KIRK 5020 5040 UK_FR_DE_ES_IT.book Page 13 Thursday, February 25, 2010
should ensure that it is permissible to be
connected to the facilities of the local tele-
communications company. The equip-
ment must also be installed using an
acceptable method of connection. The cus-
tomer should be aware that compliance
with the above conditions may not pre-
vent degradation of service in some situa-
tions.
Repairs to certified equipment should be
coordinated by a representative desig-
nated by the supplier. Any repairs or
alterations made by the user to this equip-
ment, or equipment malfunctions, may
give the telecommunications company
cause to request the user to disconnect the
equipment.
Users should ensure for their own protec-
tion that the electrical ground connections
of the power utility, telephone lines and
internal metallic water pipe system, if
present, are connected together. This pre-
caution may be particularly important in
rural areas.
EMC CAUTIONS: Users should not
attempt to make such connections them-
selves, but should contact the appropriate
electric inspection authority, or electri-
cian, as appropriate.
If your telephone equipment causes harm
to the telephone network, the telephone
company may ask you to disconnect the
system from the line until the problem has
been corrected or they may discontinue
your service temporarily. If possible, they
will notify you in advance, But if advance
notice is not practical, you should be noti-
fied as soon as possible. You will be
informed of your right to file a complaint
with the FCC.
Your telephone company may make
changes in its facilities, equipment, opera-
tions, or procedures that could affect the
proper functioning of your telephone sys-
tem, If they do and it is possible, you will
be notified in advance to give you an
13
Get user manuals: See SafeManuals.com