Publicité
Les langues disponibles
Les langues disponibles
Installing the drain hose (for direct drainage of condensed water)
To avoid having to empty the water tank every time you use the tumble dryer,
you can use the supplied drain hose for removing the water from the condenser
directly into the drain.
1. Remove the inner hose from the hose connector at the rear of the dryer.
2. Insert one end of the supplied hose onto the hose connector.
3. Place and secure the other end of the hose at a nearby sink by using the
U-fitting.
•
Be sure to follow all local codes and regulations in running the
condensate to a suitable drain.
60
PROCD82 IB.indd 60
PROCD82 IB.indd 60
13/4/2023 3:15 PM
13/4/2023 3:15 PM
Publicité
