BEFORE INSTALLING THE APPLIANCE
Before connecting your dryer to the power supply, check that the voltage stated
on the rating label of your appliance corresponds to the voltage in your home. A
different voltage could damage the appliance.
The plug is the only way to unplug the appliance and should therefore be
accessible at all times. To turn off main power to the appliance, turn it off and
then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for
damages that may occur as a result of usage without grounding.
•
It is recommended that, for your convenience, the appliance is positioned
close to your washing machine.
•
The appliance must be installed in a clean place, where dirt does not build
up.
•
The appliance should not be located near a gas hob, cooker, heater or grill, as
flames from the burners could damage it.
•
When installing the appliance, make sure that the power cord is not trapped
or twisted.
•
To keep vibration and noise to a minimum when the dryer is in use, it should
be placed on a firm, level surface.
58
PROCD82 IB.indd 58
PROCD82 IB.indd 58
INSTALLATION
13/4/2023 3:15 PM
13/4/2023 3:15 PM