Publicité
Les langues disponibles
Les langues disponibles
Front panel of the inverter:
Item
Description
A
Air-Inlets: Do not cover !
USB power supply: delivers 2.1A of current to power or charge 5V DC USB devices
B
If the battery voltage is lower than 10V, USB output is turned off.
230 V socket: delivers a 230V 50Hz pure sine wave output (Switch-position I).
• The output can deliver up to 200W (PSI200) / 400W (PSI400) of continuous power.
• For a short period (max. 10 min) it can deliver an overload power of 230W-270W
(PSI200) / 410W-450W (PSI400)
C
• Peak power is up to 400W (PSI200) / 800W (PSI400) for max. 1 sec.
If the battery´s voltage is lower than 10.5V, undervoltage-protection is activated
NOTE: Use the outputs separately and never connect them to the grid.
Red LED: Signal-lamp that indicates errors and alarms
• LED flashes + 1x alarm beep:
battery voltage protection (battery voltage is <10.5V or >15.3V
• LED flashes + 2x alarm beep:
D
temperature protection (the inverter overheated >75°C)
• LED flashes + 3x alarm beep:
overload protection (the requested power is higher than the maximum output
power of the inverter)
E
Green LED: Signal-lamp that indicates readiness for operation
Main-Switch: Switches between the operation modes of the inverter: on/off
Switch-Position 0:
F
USB-output is ON
Switch-Position I:
USB-output is ON
6
TECHNICAL DESCRIPTION
Inverter-function is OFF (no output on the 230V socket), 5V-
Inverter-function is ON (230V is available on the socket), 5V-
Publicité
